Installation adapter （SNV305）

Installation adapter （SNV305）

The fault indicator can be mounted while the overhead line is working. 

       Step 1：Open the steel clamp by two hand through push the left and right out. (see the Figure 1.)

      Step 2: Insert the opened indicator into a mounting adapter along that four “semicircular guide groove”. 

Then Gently push adapter up, at same time, turn adapter right , make the indicator into to a fixed position, 

and make sure the indicator can not pull out from the adapter. (see the Figure 2.)

     Step 3: Put indicator onto the overhead line cable with a tools. Simply push the indicator against the cable, so that

      the conductor fits into the open “spring clamp”. The spring clamp closes automatically after a light push. 

      (see the Figure 3.)

     Note：Figure 4 shows the correct installation, and Figure 5 shows the incorrect installation.